DESCRIPTION

Replace a connection definition from pluto internal database with one from /etc/ipsec.conf. Replace is very similar to ipsec add but it first deletes old connection secification and old tunnels using same connection name.

This only replaces the connection description making it possible for remote to connect. To initialize the connection you need to use ipsec up.

SEE ALSO

ipsec.conf(5), ipsec(8), ipsec_add(8), ipsec_algparse(8), ipsec_barf(8), ipsec_briefstatus(8), ipsec_certutil(8), ipsec_checkconfig(8), ipsec_checknflog(8), ipsec_checknss(8), ipsec_connectionstatus(8), ipsec_crlutil(8), ipsec_delete(8), ipsec_down(8), ipsec_ecdsasigkey(8), ipsec_fetchcrls(8), ipsec_fipsstatus(8), ipsec_globalstatus(8), ipsec_import(8), ipsec_initnss(8), ipsec_letsencrypt(8), ipsec_listall(8), ipsec_listcacerts(8), ipsec_listcerts(8), ipsec_listcrls(8), ipsec_listen(8), ipsec_listpubkeys(8), ipsec_look(8), ipsec_modutil(8), ipsec_newhostkey(8), ipsec_ondemand(8), ipsec_pk12util(8), ipsec_pluto(8), ipsec_purgeocsp(8), ipsec_redirect(8), ipsec_rereadall(8), ipsec_rereadcerts(8), ipsec_rereadsecrets(8), ipsec_restart(8), ipsec_route(8), ipsec_rsasigkey(8), ipsec_setup(8), ipsec_showhostkey(8) ipsec_showroute(8), ipsec_showstates(8), ipsec_shuntstatus(8), ipsec_start(8), ipsec_status(8), ipsec_stop(8), ipsec_trafficstatus(8), ipsec_unroute(8), ipsec_up(8), ipsec_verify(8), ipsec_vfychain(8), ipsec_whack(8)

BUGS

none

AUTHOR

Tuomo Soini