Route operation changes previously
added connection to routed state. This
cause pluto to add necessary IPsec policies and routes on
system to cause connection to be on demand,
causing connection to establish only when triggered by
outbound traffic.
If you want to add and route
a connection you can just run ipsec ondemand
connectionname.
ipsec.conf(5), ipsec(8), ipsec_add(8), ipsec_algparse(8), ipsec_barf(8), ipsec_briefconnectionstatus(8), ipsec_briefstatus(8), ipsec_certutil(8), ipsec_checkconfig(8), ipsec_checknflog(8), ipsec_checknss(8), ipsec_connectionstatus(8), ipsec_crlutil(8), ipsec_delete(8), ipsec_down(8), ipsec_ecdsasigkey(8), ipsec_fetchcrls(8), ipsec_fipsstatus(8), ipsec_globalstatus(8), ipsec_import(8), ipsec_initnss(8), ipsec_letsencrypt(8), ipsec_listall(8), ipsec_listcacerts(8), ipsec_listcerts(8), ipsec_listcrls(8), ipsec_listen(8), ipsec_listpubkeys(8), ipsec_look(8), ipsec_modutil(8), ipsec_newhostkey(8), ipsec_ondemand(8), ipsec_pk12util(8), ipsec_pluto(8), ipsec_purgeocsp(8), ipsec_redirect(8), ipsec_replace(8), ipsec_rereadall(8), ipsec_rereadcerts(8), ipsec_rereadsecrets(8), ipsec_restart(8), ipsec_showstates(8), ipsec_shuntstatus(8), ipsec_start(8), ipsec_status(8), ipsec_stop(8), ipsec_trafficstatus(8), ipsec_unroute(8), ipsec_up(8), ipsec_verify(8), ipsec_vfychain(8), ipsec_whack(8)